706 research outputs found
Impact of dispersion on pulse dynamics in chirped-pulse fiber lasers
Cataloged from PDF version of article.We report on a systematic study of an environmentally stable mode-locked Yb-doped fiber laser operating in the chirped-pulse regime. The linear cavity chirped-pulse fiber laser is constructed with a saturable absorber mirror as nonlinear mode-locking mechanism and a nonlinearity-free transmission-grating-based stretcher/compressor for dispersion management. Mode-locked operation and pulse dynamics from strong normal to strong anomalous total cavity dispersion in the range of +2.5 to -1.6 ps(2) is experimentally studied. Strongly positively chirped pulses from 4.3 ps (0.01 ps(2)) to 39 ps (2.5 ps(2)) are obtained at normal net-cavity dispersion. In the anomalous dispersion regime, the laser generates average soliton feature negatively chirped pulses with autocorrelation pulse durations from 0.8 ps (-0.07 ps(2)) to 3.9 ps (-1.6 ps(2)). The lowered peak power due to the pulse stretching allows one to increase the double pulse threshold. Based on the numerical simulation, different regimes of mode locking are obtained by varying the intra-cavity dispersion, and the characteristics of average soliton, stretched-pulse, wave-breaking-free and chirped-pulse regimes are discussed
Multi-Pulse Laser Wakefield Acceleration: A New Route to Efficient, High-Repetition-Rate Plasma Accelerators and High Flux Radiation Sources
Laser-driven plasma accelerators can generate accelerating gradients three
orders of magnitude larger than radio-frequency accelerators and have achieved
beam energies above 1 GeV in centimetre long stages. However, the pulse
repetition rate and wall-plug efficiency of plasma accelerators is limited by
the driving laser to less than approximately 1 Hz and 0.1% respectively. Here
we investigate the prospects for exciting the plasma wave with trains of
low-energy laser pulses rather than a single high-energy pulse. Resonantly
exciting the wakefield in this way would enable the use of different
technologies, such as fibre or thin-disc lasers, which are able to operate at
multi-kilohertz pulse repetition rates and with wall-plug efficiencies two
orders of magnitude higher than current laser systems. We outline the
parameters of efficient, GeV-scale, 10-kHz plasma accelerators and show that
they could drive compact X-ray sources with average photon fluxes comparable to
those of third-generation light source but with significantly improved temporal
resolution. Likewise FEL operation could be driven with comparable peak power
but with significantly larger repetition rates than extant FELs
High speed laser drilling of metals using a high repetition rate, high average power ultrafast fiber CPA system
We present an experimental study on the drilling of metal targets with ultrashort laser pulses at high repetition rates (from 50 kHz up to 975 kHz) and high average powers (up to 68 Watts), using an ytterbium-doped fiber CPA system. The number of pulses to drill through steel and copper sheets with thicknesses up to 1 mm have been measured as a function of the repetition rate and the pulse energy. Two distinctive effects, influencing the drilling efficiency at high repetition rates, have been experimentally found and studied: particle shielding and heat accumulation. While the shielding of subsequent pulses due to the ejected particles leads to a reduced ablation efficiency, this effect is counteracted by heat accumulation. The experimental data are in good qualitative agreement with simulations of the heat accumulation effect and previous studies on the particle emission. However, for materials with a high thermal conductivity as copper, both effects are negligible for the investigated processing parameters. Therefore, the full power of the fiber CPA system can be exploited, which allows to trepan high-quality holes in 0.5mm-thick copper samples with breakthrough times as low as 75 ms. © 2008 Optical Society of America
Propagation of Light in Photonic Crystal Fibre Devices
We describe a semi-analytical approach for three-dimensional analysis of
photonic crystal fibre devices. The approach relies on modal transmission-line
theory. We offer two examples illustrating the utilization of this approach in
photonic crystal fibres: the verification of the coupling action in a photonic
crystal fibre coupler and the modal reflectivity in a photonic crystal fibre
distributed Bragg reflector.Comment: 15 pages including 7 figures. Accepted for J. Opt. A: Pure Appl. Op
Real-time and Sub-wavelength Ultrafast Coherent Diffraction Imaging in the Extreme Ultraviolet
Coherent Diffraction Imaging is a technique to study matter with nanometer-scale spatial resolution based on coherent illumination of the sample with hard X-ray, soft X-ray or extreme ultraviolet light delivered from synchrotrons or more recently X-ray Free-Electron Lasers. This robust technique simultaneously allows quantitative amplitude and phase contrast imaging. Laser-driven high harmonic generation XUV-sources allow table-top realizations. However, the low conversion efficiency of lab-based sources imposes either a large scale laser system or long exposure times, preventing many applications. Here we present a lensless imaging experiment combining a high numerical aperture (NA=0.8) setup with a high average power fibre laser driven high harmonic source. The high flux and narrow-band harmonic line at 33.2 nm enables either sub-wavelength spatial resolution close to the Abbe limit (Delta r=0.8 lambda) for long exposure time, or sub-70 nm imaging in less than one second. The unprecedented high spatial resolution, compactness of the setup together with the real-time capability paves the way for a plethora of applications in fundamental and life sciences
Ultrashort pulse formation and evolution in mode-locked fiber lasers
Passive mode-locking in fiber lasers is investigated by numerical and experimental means. A non-distributed scalar model solving the nonlinear Schrödinger equation is implemented to study the starting behavior and intra-cavity dynamics numerically. Several operation regimes at positive net-cavity dispersion are experimentally accessed and studied in different environmentally stable, linear laser configurations. In particular, pulse formation and evolution in the chirped-pulse regime at highly positive cavity dispersion is discussed. Based on the experimental results a route to highly energetic pulse solutions is shown in numerical simulations. © 2011 Springer-Verlag
Carrier-envelope offset stable, coherently combined ytterbium-doped fiber CPA delivering 1 kW of average power
We present a carrier-envelope offset (CEO) stable ytterbium-doped fiber chirped-pulse amplification system employing the technology of coherent beam combining and delivering more than 1 kW of average power at a pulse repetition rate of 80 MHz. The CEO stability of the system is 220 mrad rms, characterized out-of-loop with an f -to-2f interferometer in a frequency offset range of 10 Hz to 20 MHz. The high-power amplification system boosts the average power of the CEO stable oscillator by five orders of magnitude while increasing the phase noise by only 100 mrad. No evidence of CEO noise deterioration due to coherent beam combining is found. Low-frequency CEO fluctuations at the chirped-pulse amplifier are suppressed by a “slow loop” feedback. To the best of our knowledge, this is the first demonstration of a coherently combined laser system delivering an outstanding average power and high CEO stability at the same time. © 2020 Optical Society of Americ
Discriminant analysis of solar bright points and faculae I. Classification method and center-to-limb distribution
While photospheric magnetic elements appear mainly as Bright Points (BPs) at
the disk center and as faculae near the limb, high-resolution images reveal the
coexistence of BPs and faculae over a range of heliocentric angles. This is not
explained by a "hot wall" effect through vertical flux tubes, and suggests that
the transition from BPs to faculae needs to be quantitatively investigated. To
achieve this, we made the first recorded attempt to discriminate BPs and
faculae, using a statistical classification approach based on Linear
Discriminant Analysis(LDA). This paper gives a detailed description of our
method, and shows its application on high-resolution images of active regions
to retrieve a center-to-limb distribution of BPs and faculae. Bright "magnetic"
features were detected at various disk positions by a segmentation algorithm
using simultaneous G-band and continuum information. By using a selected sample
of those features to represent BPs and faculae, suitable photometric parameters
were identified in order to carry out LDA. We thus obtained a Center-to-Limb
Variation (CLV) of the relative number of BPs and faculae, revealing the
predominance of faculae at all disk positions except close to disk center (mu >
0.9). Although the present dataset suffers from limited statistics, our results
are consistent with other observations of BPs and faculae at various disk
positions. The retrieved CLV indicates that at high resolution, faculae are an
essential constituent of active regions all across the solar disk. We speculate
that the faculae near disk center as well as the BPs away from disk center are
associated with inclined fields
- …